← Back to Stuttgart Airport
Drone Rules for Stuttgart Airport
Stuttgart, Baden-Württemberg (bw)
• Germany
Flughafenstraße 32, 70629 Stuttgart, Germany
Lat: 48.6858 • Lng: 9.20735
Rules Edit History: Stuttgart Airport
Showing changes between revisions.
Mapped shape change
Old outline is gray. New outline is blue.
May 26, 2026 9:07 AM
Approved
• Added airport flight rules
Changed fields
Mapped shape change
Click to load this change into the shared map viewer here.
| Field | Before | After |
|---|---|---|
| Rule category | Ground | Air |
| Flight status | Unknown | NoFly |
| Summary | — | You are permitted to fly up to 50 meters AGL. Above this altitude, you require air traffic control clearance from the responsible air traffic control unit. A minimum distance of 1km from the runway and airport border is required. And 5km along the extended runway center line. |
| Mapped shapes | — | b5e9ef49-ad03-4699-9760-bc520fa7a55a |
Before
After
You are permitted to fly up to 50 meters AGL. Above this altitude, you require air traffic control clearance from the responsible air traffic control unit. A minimum distance of 1 km must be maintained from the airport boundary and the runway centerlines. Along the extended runway centerlines, a minimum distance of 5 km applies. Overflight is prohibited. If flight operations are to be conducted at a closer distance, a permit in the "Specific" category is mandatory. In such cases, the name of the airport and its ICAO code must always be specified.
Show inline change markers
+ You are permitted to fly up to 50 meters AGL. Above this altitude, you require air traffic control clearance from the responsible air traffic control unit. A minimum distance of 1 km must be maintained from the airport boundary and the runway centerlines. Along the extended runway centerlines, a minimum distance of 5 km applies. Overflight is prohibited. If flight operations are to be conducted at a closer distance, a permit in the "Specific" category is mandatory. In such cases, the name of the airport and its ICAO code must always be specified.